سلام.اگه کسی میتوننه این قطعه رو وارد کنه خبرم کنه.
mehrdadshokohy@gmail.com
tech specs Technical Specifications product size in the bag ● netduino plus ● four sticky feet ● 3 ft micro usb cable
(limited time) system requirements Windows ● Windows XP, Vista, or 7 (32 or 64 bit) ● 1.6 GHz or faster processor ● 1 GB RAM ● Up to 3 GB of available hard drive space for Visual Studio Express 2010 Mac OS and Linux ● Parallels
Serial deployment and partial USB support
Requires copy of Windows in virtual machine ● VMWare Fusion or Oracle VirtualBox
Serial deployment and partial USB support
Requires copy of Windows in virtual machine ● Experimental Mono (native) support
Future native Mac OS and Linux support provided by an experimental open source project environmental ● operating temperature:
0 - 70 °C (32 - 158 °F) ● RoHS compliant ● Pb-free (lead-free) processor and memory ● Atmel 32-bit microcontroller ● Speed: 48MHz, ARM7 ● Code Storage: 64 KB
without networking: 128 KB ● RAM: 28 KB
without networking: 60 KB microcontroller documentation
AT91SAM7X512 (summary)
AT91SAM7X512 (datasheet) buttons and leds led colors ● power led: white ● user led: blue ● ethernet leds: 2 green, 1 amber button features ● functions as a reset button (default) ● can be used as GPIO input design files and source code design files (open source) ● netduino plus schematics ● netduino plus board layout source code (open source) ● .NET Micro Framework v4.1 source ● netduino firmware v4.1.0 source ● netduino sdk v4.1.0 source input and output digital i/o features ● all 20 digital and analog pins: GPIO ● digital pins 0-1: UART 1 RX, TX ● digital pins 2-3: UART 2 RX, TX ● digital pins 5-6: PWM, PWM ● digital pins 7-8: UART 2 RTS, CTS ● digital pins 9-10: PWM, PWM ● digital pins 11-13: SPI MOSI, MISO, SPCK ● analog pins 4-5: I2C SDA, SCL networking ● ethernet: 100 mbps ● network stack: lwIP storage ● micro sd (up to 2 GB) ● auto card detect power ● input: 7.5 - 12.0 VDC or USB powered ● output: 5 VDC and 3.3 VDC regulated ● analog reference: 2.6 - 3.3 VDC
only required when using ADC features ● max current: 8 mA per pin
digital pins 2, 3, 7: 16 mA per pin
analog pins 0-3: 2 mA per pin
microcontroller max current: 200 mA total ● digital i/o are 3.3 V--but 5 V tolerant