Q: Why is my AT91 device connects via USB to my computer when identified as "GPS Camera Detector"?
A: When the AT91 processor connected to a USB port on the new hardware update in the options and choices of the "Connect to Windows Update" when, windows automatically installs the driver, the error occurs.
A wrong USB driver used by Windows Update home page retrieval from. So your device will be recognized as a "GPS Camera Detector". Because not found "/ usb/ARM0), which similar to SAM-BA will prevent the normal use of the device.
The solution:
• First, make sure you get the latest version of the AT91-ISP software tools installed on your computer:
Atmel Products - Atmel ARM-based Solutions - Atmel SAM9G - Atmel SAM-BA In-system Programmer
• Use Windows Explorer search options, in "c: windowsinf" find all files in the "GPS Camera" string
Results point to a name as "oemxxx.inf" file, 'xxx' is a string of numbers, numbers will be different on different computers
The file header will look like this:
;
; WPUSBSERIAL.INF (for Windows 2000)
;
; Copyright (c) 2000, WondeProud Technology Inc.
• In the case of board charged from your computer, unplug the USB cable above
• In the control panel open the "Device Manager" -> System -> Hardware panel
• In the "Ports (COM and LPT)" option will be "GPS Camera Detect (COMxxx)"
• Right-click this option, select "Uninstall", then click "OK" to confirm the uninstall
• The selected peripherals must disappear in the list
• Remove the front to find the "oemxxx.inf" file
• Unplug the USB cable and reconnect
• A "Welcome to the Found New Hardware Wizard" dialog will appear in Windows
• Do not select the first and the second option "Windows Update" came to the driver, but to choose the third option: "No, not this time"
• In Windows, the next dialog box, select "Install the Software automatically"
• It will install smart Atmel AT91-ISP-provided driver: atm6124.sys
• When the system recognizes the selection of "Continue Anyway" and click "Finish" button
Now the device is recognized as "atm6124.sys ATMEL AT91xxxxx Test Board"
Re: zxz_vi response time: at 11:35 on February 4, 2010
A: When the AT91 processor connected to a USB port on the new hardware update in the options and choices of the "Connect to Windows Update" when, windows automatically installs the driver, the error occurs.
A wrong USB driver used by Windows Update home page retrieval from. So your device will be recognized as a "GPS Camera Detector". Because not found "/ usb/ARM0), which similar to SAM-BA will prevent the normal use of the device.
The solution:
• First, make sure you get the latest version of the AT91-ISP software tools installed on your computer:
Atmel Products - Atmel ARM-based Solutions - Atmel SAM9G - Atmel SAM-BA In-system Programmer
• Use Windows Explorer search options, in "c: windowsinf" find all files in the "GPS Camera" string
Results point to a name as "oemxxx.inf" file, 'xxx' is a string of numbers, numbers will be different on different computers
The file header will look like this:
;
; WPUSBSERIAL.INF (for Windows 2000)
;
; Copyright (c) 2000, WondeProud Technology Inc.
• In the case of board charged from your computer, unplug the USB cable above
• In the control panel open the "Device Manager" -> System -> Hardware panel
• In the "Ports (COM and LPT)" option will be "GPS Camera Detect (COMxxx)"
• Right-click this option, select "Uninstall", then click "OK" to confirm the uninstall
• The selected peripherals must disappear in the list
• Remove the front to find the "oemxxx.inf" file
• Unplug the USB cable and reconnect
• A "Welcome to the Found New Hardware Wizard" dialog will appear in Windows
• Do not select the first and the second option "Windows Update" came to the driver, but to choose the third option: "No, not this time"
• In Windows, the next dialog box, select "Install the Software automatically"
• It will install smart Atmel AT91-ISP-provided driver: atm6124.sys
• When the system recognizes the selection of "Continue Anyway" and click "Finish" button
Now the device is recognized as "atm6124.sys ATMEL AT91xxxxx Test Board"