روش بوت از طریق nand در cubietruck
با روش این فیلم آموزشی و این لینک سعی کردم بوت را از SD به NAND منتقل کنم اما همچین پیغامی میده موقع بوت.کسی هست که راهنمایی کنه؟
http://dl.cubieboard.org/media/video...ND%20flash.MP4
Cubieboard/Installing on NAND - linux-sunxi.org
کد:HELLO! BOOT0 is starting! boot0 version : 3.0.0 dram size =2048 sum=0x65176209 src_sum=0x65176209 Ready to disable icache. Jump to secend Boot. [ 0.155] U-Boot 2011.09-rc1-00003-ge89ab14-dirty (Jan 03 2014 - 12:57:33) Allwinner Tech [ 0.164]version: 1.1.0 [ 0.167]pmbus: ready [ 0.272]PMU: AXP209 [ 0.275]PMU: AXP20x found [ 0.278]PMU: bat ratio = 100 [ 0.282]after set, dcdc2 =1450mv [ 0.285]PMU: dcdc2 1450 [ 0.288]PMU: pll1 912 Mhz boot_clock = 912 dcdc2_vol = 1450 [ 0.296]after set, dcdc2 =1450mv dcdc3_vol = 1300 ldo2_vol = 3000 ldo3_vol = 2800 ldo4_vol = 2800 power_start = 1 storage_type = -1 usb_recovery = 1 find power_sply to end fel key old mode run key detect no key found no key input dram_para_set start dram_para_set end [ 0.332]DRAM: 2 GiB relocation Offset is: 75b23000 donn't initialize ther user_gpio (main_key:boot_init_gpio) DRV_DISP_Init: opened [ 0.546]boot_disp.output_type=4 [ 0.550]boot_disp.output_mode=11 [ 0.553]boot_disp.auto_hpd=1 workmode = 0 [ 1.857]NAND: NAND_UbootInit NB1 : enter NAND_LogicInit nand : get id_number_ctl from script, 3 not burn nand partition table! NB1 : nand_info_init fail [ 7.436]nand init fail fail to find part named env Using default environment In: serial Out: serial Err: serial --------fastboot partitions-------- mbr not exist base bootcmd=run setargs_nand boot_normal bootcmd set setargs_nand key 0 recovery key high 6, low 4 cant find fstbt value no misc partition is found to be run cmd=run setargs_nand boot_normal the part isn't exist WORK_MODE_BOOT WORK_MODE_BOOT [ 7.474]Hit any key to stop autoboot: 0 cant find part named boot sunxi_flash - sunxi_flash sub-system Usage: sunxi_flash read command parmeters : parmeters 0 : addr to load(hex only) parmeters 1 : the name of the part to be load [parmeters 2] : the number of bytes to be load(hex only) if [parmeters 2] not exist, the number of bytes to be load is the size of the p1 boota: bad boot image magic, maybe not a boot.img?
پاسخ با نقل قول
