MK60N512VMD100 :
[PHP]Core features
- 32-bit ARM Cortex-M4 core (up to 150MHz CPU Clock)
- DSP Support, MPU
- Nested vectored interrupt contr. (NVIC)
- Async. wake-up interrupt contr. (AWIC)
- Debug & trace capability
- 2-pin serial wire debug (SWD)
- IEEE 1149.1 Joint Test Action Group (JTAG)
- IEEE 1149.7 compact JTAG (cJTAG)
- Trace port interface unit (TPIU)
- Flash patch and breakpoint (FPB)
- Data watchpoint and trace (DWT)
- Instrumentation trace macrocell (ITM)
System and power management
- SW/HW watchdog with external monitor pin
- DMA contr. with 16 channels
- Low-leakage wake-up unit (LLWU)
- Power management contr. with 10 different power modes
- Non-maskable interrupt (NMI)
- 128-bit unique identification (ID) number per chip
Clocks
- Multi-purpose clock generator
- PLL and FLL operation
- Internal reference clocks (32kHz or 2MHz)
- 12MHz to 32MHz crystal osc.
- 32kHz to 40kHz crystal osc.
- Internal 1kHz low power osc.
- DC to 50MHz external square wave input clock
Memories and Memory Interfaces
- FlexMemory (FlexNVM or FlexRAM)
- up to 512 Flash
- up to 128KB SRAM
- Flash security and protection features
- Serial flash programming interface (EzPort)
Security and integrity
- Cyclic redundancy check (CRC)
Analog
- 16-bit SAR ADC
- Programmable voltage reference (VREF)
- High-speed Analog comparator (CMP) with 6-bit DAC
Timers
- 1x8ch motor control/general purpose/PWM flexible timer (FTM)
- 1x2ch quadrature decoder/general purpose/PWM flexible timer (FTM)
- Carrier modulator timer (CMT)
- Programmable delay block (PDB)
- 1x4ch programmable interrupt timer (PIT)
- Low-power timer (LPT)
Communications
- SPI
- CAN
- I2C with SMBUS support
- UART (w/ ISO7816, IrDA and HW flow control)
Human-machine interface
- up to 104 GPIO (pin interrupt support, DMA request capability)
- Capacitive touch sensing inputs[/PHP]
سلام جناب زرکوب
ممنون که مشخصاتشو گذاشتید
سلام
خبری از واردات این میکرو نشد؟
یا میکروهای با فرکانس و امکانات بالاترش؟