is a Windows XP/Vista GUI application for USBasp and avrdude.
این پروگرامر توسط شرکت خودمون نوشته شده و می شه باهاش توی همه کامپایلرها استفاده کرد و کار باها ش راحته
USBasp - USB programmer for Atmel AVR controllers
[Dear Guest/Member you can't see link before replyclick here to register] USBasp is a USB in-circuit programmer for Atmel AVR controllers. It simply consists of an ATMega48 or an ATMega8 and a couple of passive components. The programmer uses a firmware-only USB driver, no special USB controller is needed.
Features
- Works under multiple platforms. Linux, Mac OS X and Windows are tested.
- No special controllers or smd components are needed.
- Programming speed is up to 5kBytes/sec.
- SCK option to support targets with low clock speed (< 1,5MHz).
- Planned: serial interface to target (e.g. for debugging).
Download
Firmware and circuit
The following packages include circuit and firmware.
[Dear Guest/Member you can't see link before replyclick here to register] (260 kB)
[Dear Guest/Member you can't see link before replyclick here to register] (172 kB)
[Dear Guest/Member you can't see link before replyclick here to register] (176 kB)
[Dear Guest/Member you can't see link before replyclick here to register] (118 kB) Supports programmers with ATMega48 and ATMega8.
[Dear Guest/Member you can't see link before replyclick here to register] (116 kB) New VID/PID!
[Dear Guest/Member you can't see link before replyclick here to register] (175 kB)
[Dear Guest/Member you can't see link before replyclick here to register] (166 kB)
[Dear Guest/Member you can't see link before replyclick here to register] (169 kB)
Please refer to
[Dear Guest/Member you can't see link before replyclick here to register] for details on building, installing and using USBasp.
Drivers
On Linux and MacOS X no kernel driver is needed. Windows requires a driver for USBasp:
[Dear Guest/Member you can't see link before replyclick here to register] (70 kB)
Note: Windows Vista/7 x64 requires drivers with digital signature. Currently there are no official drivers for libusb (USBasp software is based on it) with such a signature. Users reported that there is a tool named "Driver Signature Enforcement Overrider" to avoid the signature check.
Software
- [Dear Guest/Member you can't see link before replyclick here to register] supports USBasp since version 5.2.
- [Dear Guest/Member you can't see link before replyclick here to register] supports USBasp since version 1.11.9.6.
- [Dear Guest/Member you can't see link before replyclick here to register] is a Windows XP/Vista GUI application for USBasp and avrdude.
- [Dear Guest/Member you can't see link before replyclick here to register] is a Windows GUI Software for USBasp based USB AVR programmers.
Hardware
Schematic
[Dear Guest/Member you can't see link before replyclick here to register]
PCB layouts
Here is a list of tested PCB layouts. If you have designed your own PCB, please let me know.
[Dear Guest/Member you can't see link before replyclick here to register]
[Dear Guest/Member you can't see link before replyclick here to register]
by Fisch und Fischl GmbH
Official USBasp kit with case and preprogrammed controller. No smd parts.
[Dear Guest/Member you can't see link before replyclick here to register] [Dear Guest/Member you can't see link before replyclick here to register]
[Dear Guest/Member you can't see link before replyclick here to register]
[Dear Guest/Member you can't see link before replyclick here to register]
by Thomas Fischl
Single-Side PCB, TARGET 3001! layout file
Size: 90x40 mm (optimized for case
[Dear Guest/Member you can't see link before replyclick here to register])
[Dear Guest/Member you can't see link before replyclick here to register]
[Dear Guest/Member you can't see link before replyclick here to register]
by Pawel Szramowski (11/2007)
With
Low-voltage front-end.
Single-Side PCB, EAGLE layout files, some SMD components
[Dear Guest/Member you can't see link before replyclick here to register]
[Dear Guest/Member you can't see link before replyclick here to register]
by Bernhard Walle
Double-Side PCB, EAGLE layout files, part list with order numbers for Reichelt.de and Conrad.de
Size: optimized for case
[Dear Guest/Member you can't see link before replyclick here to register]
[Dear Guest/Member you can't see link before replyclick here to register]
[Dear Guest/Member you can't see link before replyclick here to register]
by Thomas Pfeifer
Single-Side PCB, PDF layout files, SMD components
[Dear Guest/Member you can't see link before replyclick here to register]
[Dear Guest/Member you can't see link before replyclick here to register]
by Tomasz Ostrowski
Single-Side PCB, PDF and EPS layout files, only four 0805 SMD parts, rest discrete components
[Dear Guest/Member you can't see link before replyclick here to register]
[Dear Guest/Member you can't see link before replyclick here to register]
by Christian Heigemeyr
Single-Side PCB, with some SMD 0805 components, PDF-files
With additional buttons for reset and disconnection of the target
[Dear Guest/Member you can't see link before replyclick here to register]
[Dear Guest/Member you can't see link before replyclick here to register],
[Dear Guest/Member you can't see link before replyclick here to register]
[Dear Guest/Member you can't see link before replyclick here to register],
[Dear Guest/Member you can't see link before replyclick here to register],
[Dear Guest/Member you can't see link before replyclick here to register]
by Zhurov Pavel
Single-Side PCB, P-CAD 2002 format and PDF files
Crosspiece TXD and RXD are added for the ISP connector
[Dear Guest/Member you can't see link before replyclick here to register]
[Dear Guest/Member you can't see link before replyclick here to register]
by J.A. de Groot
The board is single sided (EAGLE format), measures 3 by 8 cm and uses only regular components.
[Dear Guest/Member you can't see link before replyclick here to register] (in Dutch). There is also a pdf file with 6 devices on one euro-card.
[Dear Guest/Member you can't see link before replyclick here to register]
[Dear Guest/Member you can't see link before replyclick here to register]
by Matthias Görner
Single-Side PCB, eagle-format, with PS/PDF-files
integrated sockets for target chips ATmega8 and ATmega32
[Dear Guest/Member you can't see link before replyclick here to register]
[Dear Guest/Member you can't see link before replyclick here to register]
by Hannes Östlund
Doubleside-Side PCB, SMD components, very small
[Dear Guest/Member you can't see link before replyclick here to register]
[Dear Guest/Member you can't see link before replyclick here to register]
by Sergiy Bogdancev (01/2010)
3.3V version, ATMega48 only. Single-side PCB, ExpressPCB layout format + socket board for varies AVRs. Without future serial interface, chip initially must be programmed with another programmer.
[Dear Guest/Member you can't see link before replyclick here to register]
[Dear Guest/Member you can't see link before replyclick here to register]
by Hans Hafner, HTL Mössingerstrasse-Klagenfurt, Österreich, hans.hafner (at) htl-klu (dot) at
(01/2010)
CNC-milled case (DXF file available), Eagle layout, only a few SMD parts