pertican2010
12-05-2012, 14:50
سلام به همه
من برای کار بر روی ک رکینگ CodeVisionAVR V2.05.8 نیاز به پ سورد فایل نصبی دارم.
اگه کسی از دوستان پ سورد را داشت یا پیدا کرد به من یه PM بده!
نگران ب لوکه شدن اکانتتون هم نباشید چون این پ سورد استاتیک هست و برای تمام م شتری ها یکسان هستند!
در صورتی که نسخه Standard رو خ ریدید و می خواهید Advanced ک نید من می تونم این کار را ر ایگان براتون انجام بدم.
V2.05.8 Commercial Release
Compiler
Added support for the ATtiny1634 chip
Added support for the Solomon Systech SSD2119 and Delcomp XG7100 color TFT graphic controllers (Advanced license required)
Added support for the Sitronix ST7920 graphic LCD controller
Improved the speed of the glcd_clear function for the SSD1289 and SSD1963 TFT controllers
Improved the speed of the horizontal and vertical line drawing for the SSD1289 and SSD1963 TFT controllers
Added the cl_bits_order member to the GLCDINIT_t structure for the SSD1289 and SSD1963 TFT controllers
Enhanced the code optimizer
Fixed: the compiler generated hardware multiplication instructions for the ATmega8U2, ATmega16U2 and ATmega32U2 chips, which do not support them
Fixed: assembly errors occured when using the putchar and getchar functions with the ATmega8U2, ATmega16U2 and ATmega32U2 chips
Fixed: Due to a hardware bug in XMEGA D4 chips, writing to EEPROM trashed the first byte of the EEPROM page
Corrected the definition of the frequency capture event from TC_EVACT_FRW_gc to TC_EVACT_FRQ_gc in all the xmbits_nnn.h header files for XMEGA devices
Fixed: error message when using external RAM and specifying in the project configuration a heap size larger than device's internal RAM.
CodeWizardAVR
Added support for the ATtiny1634 chip
Added in the CodeWizardAVR for XMEGA chips the possibility to specify, for the SPI operated in master mode, if the /SS signal will be used or not as chip select for peripherals connected to the SPI bus.
LCD Vision
Added support for the SDD2119, ST7920 and XG7100 graphic controllers
Fixed: the Character Set grid was not cleared when creating/importing a font and characters from previous font remained there, if the character set range of the previous font was wider than the one of the new font.
Chip Programmer
Corrected the signatures for the ATmega48A and ATmega168A chips
من برای کار بر روی ک رکینگ CodeVisionAVR V2.05.8 نیاز به پ سورد فایل نصبی دارم.
اگه کسی از دوستان پ سورد را داشت یا پیدا کرد به من یه PM بده!
نگران ب لوکه شدن اکانتتون هم نباشید چون این پ سورد استاتیک هست و برای تمام م شتری ها یکسان هستند!
در صورتی که نسخه Standard رو خ ریدید و می خواهید Advanced ک نید من می تونم این کار را ر ایگان براتون انجام بدم.
V2.05.8 Commercial Release
Compiler
Added support for the ATtiny1634 chip
Added support for the Solomon Systech SSD2119 and Delcomp XG7100 color TFT graphic controllers (Advanced license required)
Added support for the Sitronix ST7920 graphic LCD controller
Improved the speed of the glcd_clear function for the SSD1289 and SSD1963 TFT controllers
Improved the speed of the horizontal and vertical line drawing for the SSD1289 and SSD1963 TFT controllers
Added the cl_bits_order member to the GLCDINIT_t structure for the SSD1289 and SSD1963 TFT controllers
Enhanced the code optimizer
Fixed: the compiler generated hardware multiplication instructions for the ATmega8U2, ATmega16U2 and ATmega32U2 chips, which do not support them
Fixed: assembly errors occured when using the putchar and getchar functions with the ATmega8U2, ATmega16U2 and ATmega32U2 chips
Fixed: Due to a hardware bug in XMEGA D4 chips, writing to EEPROM trashed the first byte of the EEPROM page
Corrected the definition of the frequency capture event from TC_EVACT_FRW_gc to TC_EVACT_FRQ_gc in all the xmbits_nnn.h header files for XMEGA devices
Fixed: error message when using external RAM and specifying in the project configuration a heap size larger than device's internal RAM.
CodeWizardAVR
Added support for the ATtiny1634 chip
Added in the CodeWizardAVR for XMEGA chips the possibility to specify, for the SPI operated in master mode, if the /SS signal will be used or not as chip select for peripherals connected to the SPI bus.
LCD Vision
Added support for the SDD2119, ST7920 and XG7100 graphic controllers
Fixed: the Character Set grid was not cleared when creating/importing a font and characters from previous font remained there, if the character set range of the previous font was wider than the one of the new font.
Chip Programmer
Corrected the signatures for the ATmega48A and ATmega168A chips